How To Replace A Power Window Motor And Regulator. Once you have the locations marked. The cable type the top image and the gear-drive type the image below.
Locate and remove the window regulator mounting bolts then gently allow the regulator to sit inside the door until the motor is removed in some cases the motor is attached separately. This step keeps the glass out of the way while removing the regulator and motor. In others the window motor can be replaced separately.
Push the window down to unbolt the window from the regulator.
If memory serves the regulator assembly has to be removed from the door to accessreplace the motor. The cable type the top image and the gear-drive type the image below. If youre replacing just the regulator and not the motor you will need to drill out the three rivets that hold it in place then bolt the motor to the new regulator before installation with the supplied hardware thankfully not rivets. The replacement cost for a power window regulator is anywhere from 250 to 400 total.
